Skip to content

Intex Aqua 3G Pro Q Flash File/Firmware/Rom Free Download Latest Update 2022


On this page , you will find the Intex Aqua 3G Pro Q Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.

Before you downloading the Intex Aqua 3G Pro Q Flash File, Please confirm your device is Intex Aqua 3G Pro Q, if it is not , you can search the stock firmware which bricks you device in our website.

The Advantages of the Intex Aqua 3G Pro Q Flash File:

  1. Reverting the device back to stock.
  2. Updating the device to latest android version
  3. Fixing boot loop issues on your device.
  4. Improving your software performance
  5. Fixing Stutter on your device

Intex Aqua 3G Pro Q Flash File/Firmware/ROM Information

Rom NameIntex Aqua 3G Pro Q Flash File/Firmware/ROM
ROM Size660MB
Rom OS VersionAndroid 5.1
Model nameAqua 3G Pro Q
CompressZip format

Intex Aqua 3G Pro Q Flash File Download Link

Intex Aqua 3G Pro Q Flash Note

  • 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
  • 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.

Intex Aqua 3G Pro Q Flash Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.

[*] If you have any problem when using the Intex Aqua 3G Pro Q Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.

>> How To Flash Intex Aqua 3G Pro Q:

  1. Download and install the SPD Driver on your Computer
  2. Download the Firmware ROM Flash File of your Intex Device.
  3. Extract the SPD Upgrade Tool on your computer.
  4. Now, Open UpgradeDownload.exe to launch the Tool:
  5. Click on the Load Packet Button.
  6. Locate the .pac based firmware ROM flash file on your computer and click Open to load the firmware.
  7. Confirm your Intex device is Switched off then Connect your Intex Device to the Computer using the USB Cable.
  8. Click on Start Downloading button to start the Flashing process.
  9. This flashing process may take a few minutes.
  10. You will see the Passed Message on the Upgrade Tool when the Flashing process is completed. 
  11. Last, Close Upgrade Tool and Disconnect your Intex device from the Computer.