Skip to content
Home » ITEL » Itel A46 Flash File/Firmware/Rom Free Download Latest Update 2022

Itel A46 Flash File/Firmware/Rom Free Download Latest Update 2022


On this page , you will find the Itel A46 Flash File/Firmware/Rom Download link . fter Flashing it in your device and you will enjoy a Smoother Android device experience.

Before you downloading the Itel A46 Flash File, Please confirm your device is Itel A46, if it is not , you can search the stock firmware which bricks you device in our website.

The Advantages of the Itel A46 Flash File:

  1. Reverting the device back to stock.
  2. Updating the device to latest android version
  3. Fixing boot loop issues on your device.
  4. Improving your software performance
  5. Fixing Stutter on your device

Itel A46 Flash File/Firmware/ROM Information

Rom NameItel A46 Flash File/Firmware/ROM
ROM Size1012.29MB
Rom OS VersionAndroid 9.0
Model nameA46
Passwordnull
CompressZip format

Itel A46 Flash File Download Link

Itel A46 Flash Note

  • 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
  • 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.

Itel A46 Flash Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.

[*] If you have any problem when using the Itel A46 Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.

>> How To Flash Itel A46:

  1. Download the SPD Driver on your Computer
  2. Download Stock Firmware (ROM Flash File) of your Spreadtrum/Unisoc Device
  3. Unzip the SPD Upgrade Tool on your computer
  4. Open UpgradeDownload.exe to start the Tool now.
  5. Click on the Load Packet Button.
  6. Find the .pac based Stock Firmware (ROM Flash File) on your Computer and Click on Open to Load the Firmware.
  7. Using the USB Cable to connect your Spreadtrum/Unisoc Device to the Computer (make sure the device is Power Off).
  8. The upgrade tool may take a few minutes to complete the flashing process.
  9. When the flashing process is complete, you will be able to see the passed message on the upgrade tool.
  10. Disconnect your device from the Computer. Done.