Skip to content

Itel Vision 1 Pro L6502 Flash File/Firmware/Rom Free Download Latest Update 2022


On this page , you will find the Itel Vision 1 Pro L6502 Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.

Before you downloading the Itel Vision 1 Pro L6502 Flash File, Please confirm your device is Itel Vision 1 Pro L6502 , if it is not , you can search the stock firmware which bricks you device in our website.

The Advantages of the Itel Vision 1 Pro L6502 Flash File:

  1. Reverting the device back to stock.
  2. Updating the device to latest android version
  3. Fixing boot loop issues on your device.
  4. Improving your software performance
  5. Fixing Stutter on your device

Itel Vision 1 Pro L6502 Flash File/Firmware/ROM Information

Rom NameItel Vision 1 Pro L6502 Flash File/Firmware/ROM
ROM Size2GB
Rom OS VersionAndroid 10
Model nameItel Vision 1 Pro

Itel Vision 1 Pro L6502Flash File Download Link

Itel Vision 1 Pro L6502 Flash Note

  • 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
  • 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.

Itel Vision 1 Pro L6502 Flash Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.

[*] If you have any problem when using the Itel Vision 1 Pro L6502 Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.

>> How To Flash Itel Vision 1 Pro L6502:

1. Download and install the SPD Driver on your Computer (you can skip this if you have downloaded before).

2. Download provided firmware of your Itel Vision 1 Pro L6502 Device (you can skip this if you have downloaded before).

3. Extract the SPD Upgrade Tool on your computer (if you have not downloaded the SPD Upgrade Tool,then download it first).

4. Open UpgradeDownload.exe to start the Tool.

5. Click on the Load Packet Button.

6. Locate the .pac based Firmware on your Computer (which your have been download in the step 2) and Click on Open to Load the Firmware.

7.Connect your Itel Vision 1 Pro L6502 Device to the Computer via the USB Cable (make sure the device is Power Off).

8.Click on Start Downloading button to start the flashing process.

9.The flashing process is start, and it may take few minutes to complete the Flashing  process.

10.When done, a Passed Message will be showed on the Upgrade Tool.

11.Close Upgrade Tool and Disconnect your device by unplug the USB cable from the Computer.