On this page, you will find the Meizu M5 Note Flash File (Rom, Firmware) Download link. After Flashing it on your device and you will enjoy a Smoother Android device experience.
Before you download the Meizu M5 Note Flash File, Please confirm your device is Meizu M5 Note; if it is not , you can search the stock firmware that bricks your device on our website.
The Advantages of the Meizu M5 Note Flash File:
- Reverting the device back to stock.
- Updating the device to the latest Android version
- Fixing boot loop issues on your device.
- Improving your software performance
- Fixing Stutter on your device
Meizu M5 Note Flash File Information
|Meizu M5 Note Flash File
|Rom OS Version
|Meizu M5 Note
Meizu M5 Note Flash Note
- 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
- 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.
Meizu M5 Note Flash Important Notes:
[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.
[*] If you have any problem when using the Meizu M5 Note Flash File/Firmware/Rom, or can not find the device model that you want, Please contact us via Contact Us page, and we will make a response as soon as possible.
>> How To Flash Meizu M5 Note:
Step 1: Install the driver. (If you have installed it before, you can skip to the second step.)
Step 2: Flash phones
（1）Open the SP_Flash_tool folder
（2）Find flash_tool and open it.
Step 3. Configure the files
（1）Click the SP_Flash_tool folder and select MTK_AllInOne_DA.bin file
（2）Click the images folder and select MT6755_Android_scatter file
（3）Click the SP_Flash_tool folder and select auth_sv5.auth
（4）Select Download Only of the flashing mode
Step 4: Skip authorization and flash
（1）Open Skip authorization
（2）Open the Bypass_SLA_DAA tool
Open the page as shown below
Turn off the mobile phone, then press and hold the volume up and down buttons for a few seconds and connect it to the computer with a USB cable for skip authorization. The page of successful skip authorization can be shown as follows.
After the successful authorization, return to the flash_tool, then click Download button to flash.
The page of successful flashing can be shown as follows.
After flashing, disconnect the USB cable and press and hold to boot.
PS: It will take a relatively long time for the first boot, please wait patiently. After turning it on, please reboot it to ensure a better experience. The Recovery mode will be displayed and select delete all data in the process of successful boot.