Skip to content

Micromax A311 Flash File/Firmware/Rom Free Download Latest Update 2022


On this page , you will find the Micromax A311 Flash File/Firmware/Rom Download link . fter Flashing it in your device and you will enjoy a Smoother Android device experience.

Before you downloading the Micromax A311 Flash File, Please confirm your device is Micromax A311, if it is not , you can search the stock firmware which bricks you device in our website.

The Advantages of the Micromax A311 Flash File:

  1. Reverting the device back to stock.
  2. Updating the device to latest android version
  3. Fixing boot loop issues on your device.
  4. Improving your software performance
  5. Fixing Stutter on your device

Micromax A311 Flash File/Firmware/ROM Information

Rom NameMicromax A311 Flash File/Firmware/ROM
ROM Size737.48MB
Rom OS VersionAndroid 4.4
Model nameMicromax A311
CompressZip format

Micromax A311 Flash File Download Link

Micromax A311 Flash Note

  • 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
  • 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.

Micromax A311 Flash Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.

[*] If you have any problem when using the Micromax A311 Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.

>> How To Flash Micromax A311:

1- Download the latest YGDP tool (v3.98).
2- Then install ADB driver.
3- Now, start connect mobile to PC.
4- After that open device manager and confirm your mobile has been identified by PC.
5- Unzip tackle and operate the setup.
6- When tackle interface appears, enter 369 as password.
7- Select Login to use the tool.
8- Select Config and select CPU model.
9- Select CPB file and assign the path of firmware.
10- Switch off Mobile, Jion it to PC using USB cable.
11- Select start.
12- In the end flashing starts and when completed Cell 0 will turn in to green color.