Skip to content

Micromax Selfie 2 Q4311 Flash File/Firmware/Rom Free Download Latest Update 2024

On this page , you will find the Micromax Selfie 2 Q4311 Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.

Before you downloading the Micromax Selfie 2 Q4311 Flash File, Please confirm your device is Micromax Selfie 2 Q4311, if it is not , you can search the stock firmware which bricks you device in our website.

The Advantages of the Micromax Selfie 2 Q4311 Flash File:

  1. Reverting the device back to stock.
  2. Updating the device to latest android version
  3. Fixing boot loop issues on your device.
  4. Improving your software performance
  5. Fixing Stutter on your device

Micromax Selfie 2 Q4311 Flash File/Firmware/ROM Information

Rom NameMicromax Selfie 2 Q4311 Flash File/Firmware/ROM
ROM Size1.5G
Rom OS VersionAndroid 7.0
Model nameMicromax Selfie 2 Q4311
CompressZip Format

Micromax Selfie 2 Q4311 Flash File Download Link

Micromax Selfie 2 Q4311 Flash Note

  • 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
  • 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.

Micromax Selfie 2 Q4311 Flash Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.

[*] If you have any problem when using the Micromax Selfie 2 Q4311 Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.

>> How To Flash Micromax Selfie 2 Q4311:

  1. Download  Mediatek Driver and install it on your computer.
  2. Download the Micromax Selfie 2 Q4311 Firmware/ ROM of your Device and extract it on the computer.
  3. Download  SP Flash Tool and Extract it on the Computer.
  4. Open flash_tool.exe to launch the tool.
  5. Click on the Scatter-Loading Button when the SP Flash Tool is launched.
  6. Locate and select the scatter file, then click the Open button.
  7. Remove the Preloader option (flashing the Preloader.bin will make the device brick).
  8. Click on the Download Button to start the Flashing Process.
  9. Confirm your device is switched off, then Connect your Device to the Computer using the USB Cable. After connecting the device to the computer Press Volume Down or Volume Up key, so that SmartPhone Flash Tool can detect the device.

10.The Flashing process will Start Automatically when the Computer detects your Device.

11.A Green Ring will appear at the End when the Flashing Process is completed.

12.Last, Close the Flash Tool on the computer and Disconnect the Device.