Skip to content

Motorola Moto C XT1754 Flash File/Firmware/Rom Free Download Latest Update 2022


On this page , you will find the Motorola Moto C XT1754 Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.

Before you downloading the Motorola Moto C XT1754 Flash File, Please confirm your device is Motorola Moto C XT1754, if it is not , you can search the stock firmware which bricks you device in our website.

The Advantages of the Motorola Moto C XT1754 Flash File:

  1. Reverting the device back to stock.
  2. Updating the device to latest android version
  3. Fixing boot loop issues on your device.
  4. Improving your software performance
  5. Fixing Stutter on your device

 Motorola Moto C XT1754 Flash File/Firmware/ROM Information

Rom NameMotorola Moto C XT1754 Flash File/Firmware/ROM
ROM Size1.2GB
Rom OS VersionAndroid 7.0
Model name Motorola Moto C

Motorola Moto C XT1754 Flash File Download Link

Motorola Moto C XT1754 Flash Note

  • 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
  • 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.

Motorola Moto C XT1754 Flash Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.

[*] If you have any problem when using the Motorola Moto C XT1754 Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.

>> How To Flash Motorola Moto C XT1754:

Necessary Files and Procedures:
1.Unlocked Bootloader
2.Motorola Drivers Installed on your PC
3.ADB-Tools + Installer For Android 8 or Below
4.ADB-Tools + Installer for Android 9 Pie.

Let’s go to the installation procedure!
1-Extract the downloaded Firmware/Rom.
2-Extract ADB-Tools
3-Copy all the files that are inside the ADB-Tools folder and paste them inside the folder where the Rom files are.
4-Put your phone in quick start mode. With the phone switched off, press the volume down button and the power button (on/off button) at the same time for 3 to 5 seconds.

After this screen appears above (fastboot mode) connect your phone to the pc (use original USB cable or good quality).
5-With the phone in fastboot mode and connected to the pc, enter the Rom folder and run the “Installer” file
6-Ready, now just wait until the end of the procedure, the time for installation may vary according to the size of the Firmware/Rom.
Note: The first initialization of the device may take a few minutes, do nothing, just wait.