Skip to content

OPPO A93s 5G PFGM00 Flash File Scatter Download | Firmware Rom Update 2024

The OPPO A93s 5G PFGM00 Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The OPPO A93s 5G Firmware ROM is packaged in a zip file, including the OPPO A93s 5G flash file, driver, flash tool, and a detailed flash tutorial.

Why We Use OPPO A93s 5G Firmware (Flash File/Rom):

  1. To restore the OPPO device to its original configuration.
  2. To upgrade the device to the most recent Android version.
  3. To address boot loop problems.
  4. To enhance software performance.
  5. To resolve stutter issues.

OPPO A93s 5G PFGM00 Flash File (Custom Rom) Information

oppo flash file
Rom NameOPPO A93s 5G PFGM00 Flash File (Rom/Firmware)
ROM Size3.68G
Rom OS VersionAndroid 11.0
Model nameOPPO A93s 5G
CompressZip Format

OPPO PFGM00 Flash File Download Link

Important Notes on OPPO A93s 5G Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.

  • All the data will be deleted during flashing. Please back up your personal data such as address book, and messages before flashing in advance.
  • Please confirm whether the model and ROM package are correct or not.
  • Try to confirm that the power of the mobile phone is above 30%, and ensure that the data cable is in good condition. For desktop computers, please use the USB port on the back of the host.
  • Do not move mobile phones, reboot, or disconnect the power in case of flashing failures in the process. Please strictly follow the instructions of the tutorial and tool.
  • Some phones, such as Xiaomi Bootloader, need to be flashed under the unlocked status. So please confirm whether your phone has been unlocked before flashing.
  • The driver must be installed before flashing, otherwise it may occur flashing failure. (The computer should be rebooted after the driver has been installed.) (When all have fallen into place, please follow the steps below.)

>> How To Flash OPPO A93s 5G Firmware Rom:

Step 1: First things first, unlock your phone’s bootloader.
(If it’s already unlocked, you can skip right to Step Two.)

Step 2: Open up the Driver folder and install those drivers by double-clicking on each one.

Step 3: Set up the flashing tool and configure the flashing files.

  1. Open the Flash_tools folder and run flash_tool.exe.

2. Configure the flashing files.

Point 1: Choose the DA.PL.bin file located in the Flash tools folder.
Point 2: Select the MT6750_Android_scatter.txt file found in the ROM folder.

Step 4: Skip authorization

  1. Open the mtkclient-gui folder and double-click on the Bypass_SLA_DAA.bat file. (Refer to the screenshot below.)

2. Power off the phone, then connect it to the computer while holding down the volume up and volume down keys. You’ll see the success page once you’ve skipped authorization.

Step 5: Flashing

  1. Back in the flashing tool, hit Download to kick off the flashing process.

2. When flashing’s done, you’ll see the success page pop up.

(PS: Once the flashing is done, just power on your phone manually. Please note that it will take some time to boot up for the first time, so kindly be patient.)

Topics Covered:

Similar flash files:

Latest flash files: