On this page , you will find the PCD PL5004 Claro Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.
Before you downloading the PCD PL5004 Claro Flash File, Please confirm your device is PCD PL5004 Claro, if it is not , you can search the stock firmware which bricks you device in our website.
The Advantages of the PCD PL5004 Claro Flash File:
- Reverting the device back to stock.
- Updating the device to latest android version
- Fixing boot loop issues on your device.
- Improving your software performance
- Fixing Stutter on your device
PCD PL5004 Claro Flash File/Firmware/ROM Information
|Rom Name||PCD PL5004 Claro Flash File/Firmware/ROM|
|Rom OS Version||Rom Android 8.1.0|
|Model name||PCD PL 5004 Claro|
PCD PL5004 Claro Flash File/Firmware/ROM Latest Free Download Link 2022
PCD PL5004 Claro Flash Note
- 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
- 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.
PCD PL5004 Claro Flash Important Notes:
[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.
[*] If you have any problem when using the PCD PL5004 Claro Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.
>> How To Flash PCD PL5004 Claro:
- Download the PCD PL5004 Claro Flash file zip file and extract it on your computer. You can see SP flash tool and Android scatter file after extracting.
- Download and install PCD PL5004 Claro USB driver on your computer.( if you have already installed it on your computer ,you can skip this step.).
- Switch off your PCD PL5004 Claro device and remove the battery .
- Extracted folder in Step 1 and then open the SP Flash Tool sub-folder. You cn see “Flash_tool.exe” file in it. Andd then Start it.
5. When SP Flash tool is Started, click on “Download” tab.
6. Click on “scatter-loading” button in the download tab.
7. Click on “Open Scatter File” and select the scatter file from Step 1. For reference which you see the screen given below.
8. Click on the “Download” button to start flashing your device.
9. Connect your device to your computer using original USB cable (without battery – if it is battery removable) and press volume up and down button.
10. The flashing process will start momentarily, and it will get finished in a few minutes. After it finish, you can see the “Download OK” green ring in SP Flash Tool.
11. Close SP Flash tool on the computer and unplug your device.
12. Done! you have successfully flashed stock ROM on your device.