On this page , you will find the Samsung Galaxy J7 Prime 2 SM-G611 Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.
Before you downloading the Samsung Galaxy J7 Prime 2 SM-G611 Flash File, Please confirm your device is Samsung Galaxy J7 Prime 2 SM-G611, if it is not , you can search the stock firmware which bricks you device in our website.
The Advantages of the Samsung Galaxy J7 Prime 2 SM-G611 Flash File:
- Reverting the device back to stock.
- Updating the device to latest android version
- Fixing boot loop issues on your device.
- Improving your software performance
- Fixing Stutter on your device
Samsung Galaxy J7 Prime 2 SM-G611 Flash File/Firmware/ROM Information
|Rom Name||Samsung Galaxy J7 Prime 2 SM-G611 Flash File/Firmware/ROM|
|ROM Size||1.8 GB|
|Rom OS Version||Android 9 Pie|
|Model name||Samsung Galaxy J7 Prime 2|
Samsung Galaxy J7 Prime 2 SM-G611 Flash File/Firmware/ROM Latest Free Download Link 2023
Samsung Galaxy J7 Prime 2 SM-G611 Flash Note
- 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
- 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.
Samsung Galaxy J7 Prime 2 SM-G611 Flash Important Notes:
[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.
[*] If you have any problem when using the Samsung Galaxy J7 Prime 2 SM-G611 Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.
>> How To Flash Samsung Galaxy J7 Prime 2 SM-G611:
1: Download and Install Samsung USB Driver on your computer. (If have already installed it, then ignore this Step.)
2: Download and extract the Galaxy J7 Prime 2 SM-G611 Firmware files on your PC.
3: Power off your mobile device.
4: Boot into Download Mode. (PRESS AND HOLD VOLUME DOWN, HOME AND POWER BUTTON AT THE SAME TIME FOR 5-8 SECONDS UNTIL DOWNLOAD MODE IS ACTIVE.)
5:A Warning Yellow Triangle Sign will be showed. In this situation, you need to press the Volume Up key to continue the flashing process.
6: Download and open Odin. Then connect your mobile device to the computer via the USB cable.
7: Odin will automatically recognize the device when connected and show the “Added” message at the lower-left panel.
8: Click on the PDA button, and select the Firmware.tar file.
9: Click on the Start button in Odin to begin the Flashing process.
10: The Flashing process usually takes 30-50 seconds.
11.When done, A Green Box with a Pass written on it in Odin. During this process, the mobile device will reboot automatically.
12.When finish, the Pass message in Odin, you can unplug your USB cable.