Skip to content

Tecno Pop 3 BB2 Flash File Scatter Download | Firmware Rom Update 2024

Tecno Pop 3 BB2 Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Tecno BB2 Firmware ROM is packaged in a zip file, including the Tecno BB2 latest flash file, driver, flash tool, and a detailed flash tutorial.

How Tecno BB2 Firmware (Flash File/Rom) Repairs My Phone:

  1. Restore the Tecno BB2 device to its original factory settings.
  2. Upgrade the phone to the most recent version.
  3. Resolve boot loop problems.
  4. Enhance the overall software performance.
  5. Rectify stuttering issues.

Tecno Pop 3 BB2 Flash File (Stock Rom) Information

Rom NameTecno BB2 Flash File (Rom/Firmware)
ROM Size1.81G
Rom OS VersionAndroid 8.1.0
Model nameTecno BB2
CompressZip Format

Tecno Pop 3 BB2 Firmware Download Link

Important Notes on Tecno Pop 3 BB2 Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.

  • Download and correctly install the latest version of the Flash ROM client.
  • The flash will clear all data, please back up the phone data to the computer before flashing.
  • Please confirm the ROM package of the corresponding model, for the wrong version of the model will have the risk of brick.
  • Some mobile phones are distinguished from Android versions or system versions, while the version error will be dangerous.
  • Try to confirm that the power of the mobile phone is above 30%, and ensure that the data cable is in good condition. For desktop computers, please use the USB port on the back of the host.
  • Do not move mobile phones, reboot, or disconnect the power in case of flashing failures in the process. Please strictly follow the instructions of the tutorial and tool.
  • Some phones, such as Xiaomi Bootloader, need to be flashed under the unlocked status. So please confirm whether your phone has been unlocked before flashing.
  • The driver must be installed before flashing, otherwise it may occur flashing failures. (The computer should be rebooted after the driver has been installed.)

>> How To Flash Tecno Pop 3 BB2 Firmware Rom:

Step 1: Install the driver

  1. Open the drivers folder to install the driver

Step 2: The phone must first be unlocked Bootloader. (Skip directly to the third step if unlocked it before.)

Step 3: Flash phones

Open the phone to check if the system is 8.1

2. If it is 8.1, skip this step. If not, please flash the package from the rom directory into the phone through the sp flash tool.

3. Unlock again after the flashing is completed

4. When the phone is turned off, press and hold the volume up and power buttons to enter fastboot mode. Use a usb cable to connect it to the computer. Double-click the flash.bat in the images directory to start flashing. Then wait for the phone to turn on.

How to Use SP tool to flash TECNO BB2 phones?

  1. Open the ROM folder and the flash tool in sequence.

(1) Open the SP_Flash_Tool_v5.2032_Win folder

(2) Find flash_tool and open it

2. Configure files

(1) Click SP_Flash_tool folder and select MTK_AllInOne_DA.bin
(2) Click the images folder and select MT6580_ Android_ Scatter.txt
(3) Select “Download Only” of the flashing mode

Step 3: Skip for authorization and flash phones

(1) Open mtkclient-gui in the ROM folder

(2) Open Bypass_SLA_DAA.bat

Open the page as follows:

Turn off the phone, press and hold the volume up and down buttons for a few seconds and connect it through a USB cable to skip for authorization.
The successful skipping for authorization can be shown in the picture below.

After successfully skipping for authorization, click Download button in the SP flash tool to start flashing.

When the flashing progress bar starts running, release the volume up and down buttons.

The page for successful flashing can be shown below.

After the flashing is completed, unplug the usb cable and long press to boot.

PS: Please wait patiently for the relatively long boot. After turning it on, please reboot it for a better experience. If Recovery mode is displayed during booting, select clear all data to boot successfully.

If you have any problem when installing Tecno BB2 ROM Firmware, please contact us via the Contact Us page, and we will make a response as soon as possible.

Topics Covered:

Similar flash files:

Latest flash files: