Skip to content

Vivo Y50 PD1965 Flash File Scatter Download | Firmware Rom Latest Version 2024

Welcome! You’re on the page to download Vivo Y50 PD1965 Flash File (Stock Rom, Firmware). Check out the download link below and let’s get started!

The Vivo Y50 PD1965 Flash File is bundled in a zip package, encompassing the Vivo Y50 Firmware, Flash Tool, and a comprehensive Flash Tutorial.

Advantages of Vivo Y50 PD1965 Firmware:

  1. Restore device to factory settings.
  2. Update device to the latest Android version.
  3. Fix boot loop issues.
  4. Optimize software performance for smoother experience.
  5. Less stuttering problems.

Vivo Y50 PD1965 Flash File (Custom Rom) Information

Rom NameVivo Y50 PD1965 Flash File (Rom/Firmware)
ROM Size6.29G
Rom OS VersionAndroid 10.0
Model nameVivo Y50 (PD1965)
CompressZip Format

Vivo Y50 Flash File Download Link

Vivo Y50 PD1965 Flash Important Notes:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.

(1) All data will be deleted during flashing. Please back up personal data such as contacts and messages beforehand.

(2) Double-check the model and ROM package for accuracy.

(3) Ensure the phone is charged above 30% and the data cable is in good condition. For desktop computers, use the USB port located at the rear.

(4) Avoid moving the mobile phone, initiating reboots, or disconnecting the power in the event of flashing failures during the process. Please strictly follow the instructions of the tutorial and tool.

(5) Confirm whether your phone has been unlocked before flashing.

(6) Install the driver before flashing to prevent flashing failure. (Reboot the computer after driver installation.)

When all has fallen into place, please follow the steps below.

>> How To Flash Vivo Y50 PD1965 Firmware Rom:

Step 1: Unlock the Bootloader. (For more information, please refer to the UnlockBL Tutorial.)

Step 2: Open the driver folder and install all drivers. (If they are already been installed, skip it.)

Step 3: The required driver is in the driver folder, double-click to install it one by one, please restart the computer after installation. (If they are already been installed, skip it.)

Step 4: Power off, hold the volume up button and the power button until the phone vibrates, release the power key and volume key, and the device will enter Fastboot mode.

Step 5: Double-click the QFLTool.exe which is in the QFLTool folder and connect your Android Device with a USB Cable to your computer.

Step 6: Follow the instructions to flash the firmware.

(1)Choose FASTBOOT MODE and click the Load Firmware button.
(2)Find the location of the flashing package and select the directory of the firmware.
(3)Click the Device Manage button and ensure your Device has connected to the computer.
(4)Click the [FB]FLASH button and wait for the flashing to be completed.
(5)All done, Disconnect, press the power button to boot.

Topics Covered:

Similar flash files:

Latest flash files: