Skip to content

Vivo Y52s 5G PD2106 Flash File Scatter Download | Firmware Rom Update 2024

The Vivo Y52s 5G PD2106 Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Vivo Y52s 5G Firmware ROM is packaged in a zip file, including the Vivo Y52s flash file, driver, flash tool, and a detailed flash tutorial.

Why We Download Vivo Y52s Firmware (Flash File/Rom):

  1. To revert the Vivo Y52s device to its default settings.
  2. To update the device to the latest version.
  3. To rectify boot loop issues.
  4. To improve the overall software performance.
  5. To eliminate stutter issues.

Vivo Y52s 5G PD2106 Flash File (Custom Rom) Information

vivo flash file
Rom NameY52s 5G PD2106 Flash File (Rom/Firmware)
ROM Size5.42G
Rom OS VersionAndroid 10
Model nameVivo Y52s 5G
CompressZip Format

Vivo PD2106 Flash File Download Link

Important Notes on Vivo Y52s PD2106 Flashing:

Disclaimer: Before initiating the flash, kindly deactivate the computer security manager or any anti-virus software to prevent accidental file deletion. Wire-flashing is specifically intended for firmware upgrades, downgrades, and software repair. In case of any hardware problems, opt for after-sales maintenance service.

  • During the flashing process, all data will be erased. It is advisable to back up your personal data, including the address book and short messages, before proceeding with the flash.
  • Please ensure the accuracy of the model and ROM package before proceeding.
  • Verify that the mobile phone has a power level above 30%, and ensure the data cable is in good condition. If using desktop computers, use the USB port at the back of the host.
  • To prevent flashing failures, refrain from moving the mobile phone, rebooting, or disconnecting the power during the process. 
  • For certain phones, like those with Xiaomi Bootloader, flashing should occur when the phone is in the unlocked status. So, please verify whether your phone has been unlocked before the flashing.
  • Install the driver before flashing to avoid potential flashing failures. (The computer should be rebooted after the driver has been installed.) (When all have fallen into place, please follow the steps below.)

>> How To Flash Vivo Y52s 5G Firmware Rom:

Step 1: Begin by unlocking the phone’s bootloader. If you’ve unlocked it previously, proceed directly to the second step; otherwise, unlock it first.

Step 2: Install the drivers by double-clicking in the Driver folder.

Step 3: Configure flashing files using the flash tool:

  1. Open flash_tool.exe in the Flash_tools folder.

2. Configure the flashing files as follows:

Marked point 1: Select the MTK_AllInOne_DA.bin file located in the Flash tools folder
Marked point 2: Select the MT6750_Android_scatter.txt file located in the ROM folder
Marked point 3: Select Download only of the flashing mode

Step 4: Skip authorization

  1. Double click to open the Bypass_SLA_DAA.Bat file in the mtkclient-gui folder. (Pages shown as the figure below)

2. Turn off the phone, then connect it to the computer by pressing the volume up and down buttons simultaneously.
The successful skipping for authorization can be shown in the page below.

Step 5: Flash vivo Y52s 5G phones

  1. Return to the configured flash tool and click Download to flash phones

2. The successful page of flashing can be shown below

PS: After the flashing is complete, manually boot up the phone. Please wait patiently for the relatively long start-up.

If you have any problem when installing Vivo Y52s ROM Firmware, please contact us via the Contact Us page, and we will make a response as soon as possible.

Topics Covered:

Similar flash files:

Latest flash files: