Skip to content

Vivo Y69A Flash File Scatter Download | Firmware Rom Update 2024

The Vivo Y69A Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Vivo Y69A Firmware ROM is packaged in a zip file, including the Y69A flash file, driver, flash tool, and a detailed flash tutorial.

Why We Use Vivo Y69A Firmware (Flash File/Rom):

  1. To restore the Vivo device to its original configuration.
  2. To upgrade the device to the most recent Android version.
  3. To address boot loop problems.
  4. To enhance software performance.
  5. To resolve stutter issues.

Vivo Y69A Flash File (Custom Rom) Information

vivo flash file
Rom NameVivo Y69A Flash File (Rom/Firmware)
ROM Size2.52G
Rom OS VersionAndroid 7.0
Model nameVivo Y69A
CompressZip Format

Vivo Y69A Flash File/Firmware/ROM Latest Free Download Link 2024

Important Notes on Vivo Y69A Flashing:

Disclaimer: Prior to flashing, ensure that computer security software or antivirus programs are deactivated to prevent inadvertent file deletion. Flashing is just used for firmware upgrades, downgrades, and software repair. For hardware problems, it is recommended to seek assistance from after-sales services.

  • Flashing will result in the loss of all data. Therefore, it is crucial to backup personal data in advance, such as contacts and messages.
  • Double-check that the model of your device matches the ROM package.
  • Aim for at least 30% battery and a sturdy data cable. If you’re on a desktop, please use the USB port on the back of the host.
  • To avoid flashing failure, keep your phone steady and don’t restart the computer, or disconnect power sources.
  • Some phones need unlocking before they can be flashed like Xiaomi’s bootloader unlocking. So, please verify whether your phone has already been unlocked before proceeding with flashing.
  • Make sure to install the necessary drivers before flashing. After that, give your computer a reboot before diving into the next steps.

>> How To Flash Vivo Y69A Firmware Rom:

Step 1: Unlock the bootloader using unlocking tools, Security Dongle, or any other applicable methods.

Step 2: Get drivers installed from the Driver folder. If they’re already in, you may proceed to the next step.

Step 3: Let the flashing begin!
Open up flash_tool.exe in the Flash_Tool folder.
(1) Click on that configuration file as directed, indicated by the red marking labeled “1”. (As shown below.)

(2) Launch Auth Bypass.exe, hit DYPASS, and then hit Download in flash_tool.exe. (As shown below)

(3) Power down your phone, and connect it to your computer with the USB cable, holding down the volume up and down keys to enter Flash mode.
(4) You’re good to go when the flashing’s successful, as shown in the image below.

Topics Covered:

Similar flash files:

Latest flash files: