Skip to content

Vivo Y93 MTK Flash File Scatter Download | Firmware Rom Update 2024

Vivo Y93 MTK Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Vivo Y93 MTK Firmware ROM is packaged in a zip file, including the Y93 MTK flash file, driver, flash tool, and a detailed flash tutorial.

Why We Download Vivo Y93 MTK Firmware (Flash File/Rom):

  1. To revert the Vivo Y93 MTK device to its default settings.
  2. To update the device to the latest version.
  3. To rectify boot loop issues.
  4. To improve the overall software performance.
  5. To eliminate stutter issues.

Vivo Y93 MTK Flash File (Custom Rom) Information

Rom NameVivo Y93 MTK Flash File (Rom/Firmware)
ROM Size4.7G
Rom OS VersionAndroid 8.1
Model nameVivo Y93 MTK
CompressZip Format

Vivo Y93 MTK Flash File Download Link

Important Notes on Vivo Y93 MTK Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.

  • All the data will be deleted during flashing. Please back up your personal data such as address book, and short messages before flashing in advance.
  • Please confirm whether the model and ROM package are correct or not.
  • Try to confirm that the power of the mobile phone is above 30%, and ensure that the data cable is in good condition. For desktop computers, please use the USB port on the back of the host.
  • Do not move mobile phones, reboot, or disconnect the power in case of flashing failures in the process. Please strictly follow the instructions of the tutorial and tool.
  • The driver must be installed before flashing, otherwise it may occur flashing failure. (The computer should be rebooted after the driver has been installed.) (When all have fallen into place, please follow the steps below.)

>> How To Flash Vivo Y93 MTK:

  1. Unlock the BL lock (this step needs to be completed with the help of professionals, and it is not included in the flashing step.)
  2. Open the driver folder and install all drivers.

3. The required driver is in the driver folder; double-click to install it one by one, and please restart the computer after installation.

4. The phone enters Fast Boot mode.

Turn off the phone, press and hold the volume up and power buttons and the phone will enter Fast boot mode after a few seconds. The interface is as follows.

5. Open the MiFlash2018-5-28-0 flashing tool, select the directory where the flash is located, and connect the phone to flash.

(1) Find the location of the flashing package and select the directory
(2)Select the flash mode and delete all.
(3)Load the device and detect the mobile phone that has connected to the computer.
(4)Perform flashing and wait for the flashing to be completed.
(5)Disconnect, press the power button to boot.

PS: It will take a relatively long time for the first boot, please wait patiently. (If the flashing does not succeed, please follow the methods below to solve it.)

Flashing port driver problem

  1. The MFlash progress bar is still loading in seconds, while the interface indicates the echo mismatch. In this case, the phone is not successfully flashed. (such as the figure below). If the progress bar displays 0 second, you can also follow the steps below.)

(1) The normal computer port with MTK chip displays Android BootLoader interface.

(2) Solutions for wrong ports: Click the mouse right button>Update the driver program>Browse my computer to search the driver software>Select from the lists of the available drivers >Finally select Android BootLoader Interface. If such cannot be executed, turn on the phone and connect it to the computer to check whether the convenient device on the computer port displays an exclamation mark. If so, please update the port.

Qualcomm chip: Use Qualcomm chip to flash phones; the computer port will display 9008. (The driver located in the ROM package should be installed before flashing. After installation, please reboot the computer.)
PS: Several attempts can be made to improve the success rate.

Topics Covered:

Similar flash files:

Latest flash files: