Skip to content

Xiaomi Redmi 6 Pro Flash File Scatter Download | Firmware Rom Update 2024

Xiaomi Redmi 6 Pro Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Redmi 6 Pro Firmware ROM is packaged in a zip file, including the Redmi 6 Pro flash file, driver, flash tool, and a detailed flash tutorial.

Why We Download Xiaomi Redmi 6 Pro Firmware (Flash File/Rom):

  1. To revert the Redmi 6 Pro device to its default settings.
  2. To update the device to the latest version.
  3. To rectify boot loop issues.
  4. To improve the overall software performance.
  5. To eliminate stutter issues.

Xiaomi Redmi 6 Pro Flash File (Custom Rom) Information

Xiaomi flash file
Rom NameXiaomi Redmi 6 Pro Flash File (Rom/Firmware)
ROM Size4.02G
Rom OS VersionAndroid 9.0
Model nameRedmi 6 Pro
CompressZip Format

Redmi 6 Pro Flash File Download Link

Important Notes on Xiaomi Redmi 6 Pro Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.

  • All the data will be deleted during flashing. Please back up your personal data such as address book, and short messages before flashing in advance.
  • Please confirm whether the model and ROM package are correct or not.
  • Try to confirm that the power of the mobile phone is above 30%, and ensure that the data cable is in good condition. For desktop computers, please use the USB port on the back of the host.
  • Do not move mobile phones, reboot, or disconnect the power in case of flashing failures in the process. Please strictly follow the instructions of the tutorial and tool.
  • Some phones, such as Xiaomi Bootloader, need to be flashed under the unlocked status. So please confirm whether your phone has been unlocked before flashing.
  • The driver must be installed before flashing, otherwise it may occur flashing failure. (The computer should be rebooted after the driver has been installed.) (When all have fallen into place, please follow the steps below.)

>> How To Flash Xiaomi Redmi 6 Pro Firmware Rom:

Step 1: The phone must first be unlocked the Bootloader.

(If you have unlocked it before, you can skip directly to the second step. lf is not unlocked, unlock it first)

Step 2: Click the Driver folder and double-click to install drivers.

Step 3: Find XiaoMiFlash in the MiFlash2018-5-28-0 folder and open it.

Step 4: Install the driver tool

  1. Click Driver
  2. Click to install

Step 5: Configure files

  1. Click to select
  2. Select the ROM folder called Redmi_6pro_9
  3. Click to confirm

Step 6: When the mobile phone is turned off, press and hold the volume down and power buttons to enter fastboot mode and connect it to the computer.

  1. Click to load the device
  2. Click to flash phones

Step 7: If flashing successfully, the phone will automatically start up. (You can also long press the power button to boot.) The page of successful flashing can be shown in the picture below.

PS: It will take a relatively long time for the first boot, please wait patiently. (If the flashing does not succeed, please follow the methods below to solve it.)

Flashing port driver problem

  1. The MFlash progress bar is still loading in seconds, while the interface indicates the echo mismatch. In this case, the phone is not successfully flashed. (such as the figure below). If the progress bar displays 0 second, you can also follow the steps below.)

(1)The normal computer port with MTK chip displays Android BootLoader lnterface
(2)Solutions for wrong ports: Click the mouse right button>Update the driver program>Browse my computer to search the driver software>Select from the lists of the available drivers >Finally select Android BootLoader Interface. If such cannot be executed, turn on the phone and connect it to the computer to check whether the convenient device on the computer port displays an exclamation mark. If so, please update the port.

Qualcomm chip: Use Qualcomm chip to flash phones, the computer port will display 9008. (The driver located in the ROM package should be installed before flashing. After installation, please reboot the computer.)

PS: Several attempts can be taken to improve the success rate.

Topics Covered:

Similar flash files:

Latest flash files: