On this page, you will find the Vivo Y19 PD1934F Flash File/Firmware/Rom Download link. After Flashing it on your device and you will enjoy a Smoother Android device experience.
Before you download the Vivo Y19 PD1934F Flash File, Please confirm your device is Vivo Y19 PD1934F, if it is not , you can search the stock firmware that bricks your device on our website.
The Advantages of the Vivo Y19 PD1934F Flash File:
- Reverting the device back to stock.
- Updating the device to the latest android version
- Fixing boot loop issues on your device.
- Improving your software performance
- Fixing Stutter on your device
Vivo Y19 PD1934F Flash File/Firmware/ROM Information
| Rom Name | Vivo Y19 PD1934F Flash File/Firmware/ROM |
| ROM Size | 3.44G |
| Rom OS Version | Android 9.0 |
| Compress | Zip format |
| Model name | Vivo Y19 |
Vivo Y19 PD1934F Flash File/Firmware/ROM Latest Free Download Link 2024
Vivo Y19 PD1934F Flash Note
- 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
- 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.
Vivo Y19 PD1934F Flash Important Notes:
[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.
[*] If you have any problem when using the Vivo Y19 PD1934F Flash File/Firmware/Rom, or can not find the device model that you want, Please contact us via the Contact Us page, and we will make a response as soon as possible.
>> How To Flash Vivo Y19 PD1934F:
Precautions before flashing:
(1) Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.
(2) Please confirm whether the model and ROM package are correct or not.
(3) Try to confirm that the power of the mobile phone is above 30%, and ensure that the data cable is in good condition. For desktop computers, please use the USB port on the back of the host.
(4) Do not move mobile phones, reboot, or disconnect the power in case of flashing failures in the process. Please strictly follow the instructions of the tutorial and tool.
(5) Some phones, such as Xiaomi Bootloader, need to be flashed under the unlocked status. So please confirm whether your phone has been unlocked before flashing.
(6) The driver must be installed before flashing, otherwise it may occur flashing failure. (The computer should be rebooted after the driver has been installed.) (When all have fallen into place, please follow the steps below.)
Step 1: The phone must first be unlocked the Bootloader
(If you have unlocked it before, you can skip directly to the second step. If not, please unlock it first)
Step 2: Open the Driver folder and double-click to install the following drivers.
Step 3: Open the flash tool to configure the flashing files
Marked point 1: Select the MTK_AllInOne_DA.bin file located in the Flash tools folder
Marked point 2: Select the MT6750_Android_scatter.txt file located in the images folder
Marked point 3: Select Download only of the flashing mode
Step 4: Skip for authorization
- Double click to open the Bypass_SLA_DAA.Bat file in the mtkclient-gui folder. (Pages shown as the figure below)
2. Turn off the phone, long press the volume up and down buttons to connect to the computer.
The successful skipping for authorization can be shown in the page below.
Step 5: Flash phones
- Return to the configured flash tool and click Download to flash phones
2. The successful page of flashing can be shown below
PS: After the flashing is completed, manually boot up. Please wait patiently for the relatively long start-up.
Topics Covered: