Skip to content

Samsung Galaxy S10 plus SM-G975F Flash File/ Firmware/Rom Free Download Latest Update 2022


On this page , you will find the Samsung Galaxy S10 plus SM-G975F Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.

Before you downloading the Samsung Galaxy S10 plus SM-G975F  Flash File, Please confirm your device is Samsung Galaxy S10 plus SM-G975F , if it is not , you can search the stock firmware which bricks you device in our website.

The Advantages of the Samsung Galaxy S10 plus SM-G975F  Flash File:

  1. Reverting the device back to stock.
  2. Updating the device to latest android version
  3. Fixing boot loop issues on your device.
  4. Improving your software performance
  5. Fixing Stutter on your device

Samsung Galaxy S10 plus SM-G975F  Flash File/Firmware/ROM Information

Rom NameSamsung Galaxy S10 plus SM-G975F  Flash File/Firmware/ROM
ROM Size4.4GB
Rom OS VersionAndroid 10
Model nameSamsung Galaxy S10 plus

Samsung Galaxy S10 plus SM-G975F  Flash File Download Link

Samsung Galaxy S10 plus SM-G975F Flash Note

  • 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
  • 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.

Samsung Galaxy S10 plus SM-G975F Flash Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.

[*] If you have any problem when using the Samsung Galaxy S10 plus SM-G975F Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.

>> How To Flash Samsung Galaxy S10 plus SM-G975F :

1: Download and Install Samsung USB Driver on your computer. (if you have installed it before,then pass this setp.)

2: Download and extract the Galaxy S10 + SM-G975F U6 Firmware files on your window computer.

3: Power off your phone.

4: Boot your phone into Download Mode. (PRESS AND HOLD VOLUME DOWN, HOME AND POWER BUTTON AT THE SAME TIME FOR 5-8 SECONDS UNTIL DOWNLOAD MODE IS ACTIVE.)

5: After that, you can see a Warning Yellow Triangle Sign. In this situation, you have to press the Volume Up key to continue.

6: Download and open Odin. Then connect your Samsung Galaxy S10 plus SM-G975F phone to the computer via using the USB cable.

7: Then, Odin will automatically recognize the mobile device and you can see the “Added” message at the lower-left panel.

8: Click on the PDA button, and select the Firmware.tar file.

9: Click on the Start button in Odin to Stast the flashing process.

10: Flashing usually takes 30-50 seconds ,please wait.

11.When done, you will be able to see a Pass message on it in Odin. During this process, the mobile device will reboot automatically.

12.The end, you can disconnect your Device from the computer.