Skip to content

Vivo T1 5G PD2165F Flash File/Firmware/Rom Free Download Latest Update 2022


On this page , you will find the Vivo T1 5G PD2165F Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.

Before you downloading the Vivo T1 5G PD2165F Flash File, Please confirm your device is Vivo T1 5G PD2165F, if it is not , you can search the stock firmware which bricks you device in our website.

The Advantages of the Vivo T1 5G PD2165F Flash File:

  1. Reverting the device back to stock.
  2. Updating the device to latest android version
  3. Fixing boot loop issues on your device.
  4. Improving your software performance
  5. Fixing Stutter on your device

Vivo T1 5G PD2165F Flash File/Firmware/ROM Information

Rom NameVivo T1 5G PD2165F Flash File/Firmware/ROM
ROM Size4.4 GB
Rom OS VersionAndroid 12
Model nameVivo T1 5G

Vivo T1 5G PD2165F Flash File Download Link

Vivo T1 5G PD2165F Flash Note

  • 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
  • 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.

Vivo T1 5G PD2165F Flash Important Notes:

[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.

[*] If you have any problem when using the Vivo T1 5G PD2165F Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.

>> How To Flash Vivo T1 5G PD2165F:

  1. Download the MSM Download tool, the provided Vivo T1 5G PD2165F firmware, and drivers on your PC.
  2. Install the USB drivers on the PC.
  3. Put the MSM download tool and the provided Vivo T1 5G PD2165F firmware in the same folder.
  4. Launch the MSM download tool and connect your mobile device to your PC.
  5. When connected, it will automatically load the firmware( if not automatically load, you can select the firmware manually.)
  6. Click on the “start” button and wait until finish.
  7. When done! You can remove your USB cable from your PC.