On this page , you will find the Xiaomi Redmi 6A 8.1.0 Flash File (Rom,Firmware) Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.
Before you downloading the Xiaomi Redmi 6A 8.1.0 Flash File, Please confirm your device is Xiaomi Redmi 6A 8.1.0 , if it is not , you can search the stock firmware which bricks you device in our website.
The Advantages of the Xiaomi Redmi 6A 8.1.0 Flash File:
- Reverting the device back to stock.
- Updating the device to latest android version
- Fixing boot loop issues on your device.
- Improving your software performance
- Fixing Stutter on your device
Xiaomi Redmi 6A 8.1.0 Flash File Information
| Rom Name | Xiaomi Redmi 6A 8.1.0 Flash File |
| ROM Size | 2.06G |
| Rom OS Version | Android 8.1.0 |
| Model name | Xiaomi Redmi 6A |
| Compress | Zip format |
Xiaomi Redmi 6A 8.1.0 Flash File Latest Free Download Link 2024
Xiaomi Redmi 6A 8.1.0 Flash Note
- 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
- 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.
Xiaomi Redmi 6A 8.1.0 Flash Important Notes:
[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.
[*] If you have any problem when using the Xiaomi Redmi 6A 8.1.0 Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.
>> How To Flash Xiaomi Redmi 6A 8.1.0:
Precautions before flashing
Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.
（1）All the data will be deleted during flashing. Please back up your personal data such as address book, and short messages before flashing in advance.
（2）Please confirm whether the model and ROM package are correct or not.
（3）Try to confirm that the power of the mobile phone is above 30%, and ensure that the data cable is in good condition. For desktop computers, please use the USB port on the back of the host.
（4）Do not move mobile phones, reboot, or disconnect the power in case of flashing failures in the process. Please strictly follow the instructions of the tutorial and tool.
（5）Some phones, such as Xiaomi Bootloader, need to be flashed under the unlocked status. So please confirm whether your phone has been unlocked before flashing.
（6）The driver must be installed before flashing, otherwise it may occur flashing failure. (The computer should be rebooted after the driver has been installed.) (When all have fallen into place, please follow the steps below.)
Step 1: The phone must first be unlocked the Bootloader
(If you have unlocked it before, you can skip directly to the second step. )
- Unlock the mobile phone
（1）The mobile phone should be entered the developer mode firstly. (If not sure of the detailed procedure, please search it online.)
（2）Enter mobile settings to select more settings. Then select the developer option to check the unlocked status of the device. On the one hand, If it is locked, it should be unlocked firstly. You should log into the Xiaomi account to bind the mobile phone firstly. On the other hand, If unlocked, you can skip directly to the second step.
（3）Open the miflash_unlock_6.6.510.47 folder in the flashing package. Open the miflash_unlock.exe. The interface can be shown as follows.
（4）Log into Xiaomi account (It can be registered)
（5）Long press and hold the volume down and power buttons to enter fastboot mode and connect it to the computer. Then click to unlock.
Click the unlock button to unlock the phone. Wait for the unlock to be completed and then execute flashing.
Step 2: Click the Driver folder to install the following drivers.
Step 3: Flash phones
（1）Find flash_tool in the Flash_tool folder and open it.
2.Configure files
(1)Click Download Agent. Select the MTK_AllInOne_DA.bin file in the Flash_tools folder.
(2)Click choose behind the Scatter-1oading File. Select the MT6750_Android_scatter file in the ROM folder.
Step 4: Find the Bypass_SLA_DAA tool in the mtkclient-gui folder and open it. Then turn off the mobile phone, press and hold the volume up and down buttons and connect it to the computer with a USB cable. The page of successful authorization can be shown in the picture below. You can check whether it is connected at the port.
Step 5: After the port is connected, click Download to start flashing in the configured flashing tool.
The page of successful flashing can be shown below.
PS: It will take a relatively long time for the first boot, please wait patiently. Please reboot the phone after turning it on for a better experience. (If the flashing does not succeed, please follow the methods below to solve it.)
Flashing port driver problem
（1）The normal computer port with MTK chip displays Android BootLoader lnterface
（2）Solutions for wrong ports: Click the mouse right button>Update the driver program>Browse my computer to search the driver software>Select from the lists of the available drivers >Finally
select Android BootLoader Interface. If such cannot be executed, turn on the phone and connect it to the computer to check whether the convenient device on the computer port displays an exclamation mark. If so, please update the port.
Topics covers in this article:
Xiaomi Redmi 6A 8.1.0 firmware download
Xiaomi Redmi 6A 8.1.0 rom download