Skip to content

Redmi Note 5 Pro Flash File Scatter Download | Firmware Rom Update 2024

The Redmi Note 5 Pro (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Redmi Note 5 Pro Firmware ROM is packaged in a zip file, including the flash file, driver, flash tool, and a detailed flash tutorial.

Why We Download Redmi Note 5 Pro Firmware (Flash File/Rom):

  1. To restore the Redmi device to its original configuration.
  2. To upgrade the device to the most recent Android version.
  3. To address boot loop problems.
  4. To enhance software performance.
  5. To resolve stutter issues.

Redmi Note 5 Pro Flash File (Custom Rom) Information

Rom NameRedmi Note 5 Pro Flash File (Rom/Firmware)
ROM Size2.41G
Rom OS VersionAndroid 9.0
Model nameRedmi Note 5 Pro
CompressZip Format

Redmi Note 5 Pro Flash File/Firmware/ROM Latest Free Download Link 2024

Important Notes on Redmi Note 5 Pro Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Also, please note that flashing is intended for firmware upgrades, downgrades, and software repairs, not for hardware issues.

  • Flashing will result in the loss of all data. Therefore, it is crucial to backup personal data in advance, such as contacts and messages.
  • Double-check that the model of your device matches the ROM package.
  • Aim for at least 30% battery and a sturdy data cable. If you’re on a desktop, please use the USB port on the back of the host.
  • To avoid flashing failure, keep your phone steady and don’t restart the computer, or disconnect power sources.
  • Some phones, such as Xiaomi, need to be flashed under the unlocked status. So please confirm whether your phone’s Bootloader has been unlocked before flashing.

>> How To Flash Redmi Note 5 Pro Firmware Rom:

Step 1: Get the necessary driver installed from the driver folder.

Step 2: Find XiaoMiFlash in the MiFlash2018-5-28-0 folder and open it.

Step 3: Install the driver tool

（1）Click Driver
（2）Click to install

Step 4: Select the folder directory of the flashing package. Choose “All Delete”.

（1）Click to select
（2）Select the images folder in the flashing package
（3）Click to confirm
（4）Select “All delete” mode in the bottom right corner.

Step 5: Press and hold the volume down and power buttons at the same time to enter the fast boot mode and connect it to the computer. Click to load the device and finally flash phones. Wait for the progress bar to complete.

Step 6: The phone will automatically start up if flashing successfully. The success page of flashing can be shown in the following picture.

PS: It will take a relatively long time for the first boot, please wait patiently.

If you run into problems during flashing, like the MiFlash progress bar staying at 0 seconds or errors with the port driver, check the Flashing Tutorial that came with your downloaded package for troubleshooting steps.

Topics Covered:

Similar flash files:

Latest flash files:

HOT: