On this page , you will find the Coolpad Mega 5C Flash File/Firmware/Rom Download link . After Flashing it in your device and you will enjoy a Smoother Android device experience.
Before you downloading the Coolpad Mega 5C Flash File, Please confirm your device is Coolpad Mega 5C, if it is not , you can search the stock firmware which bricks you device in our website.
The Advantages of the Coolpad Mega 5C Flash File:
- Reverting the device back to stock.
- Updating the device to latest android version
- Fixing boot loop issues on your device.
- Improving your software performance
- Fixing Stutter on your device
Coolpad Mega 5C Flash File/Firmware/ROM Information
| Rom Name | Coolpad Mega 5C Flash File/Firmware/ROM |
| ROM Size | 911MB |
| Rom OS Version | Android 8.1 |
| Model name | Coolpad Mega 5C |
Coolpad Mega 5C Flash File/Firmware/ROM Latest Free Download Link 2024
Coolpad Mega 5C Flash Note
- 1. Before downloading, Must make sure take a backup of Your ROM and Personal data as it will Deleted after flashing the stock firmware.
- 2. Please confirm Your Phone Have at least 40-50% Charge when flashing your device.
Coolpad Mega 5C Flash Important Notes:
[*] Disclaimer: Firmware flashing is a tedious process and should be carried out only if you have enough knowledge. We will not be held responsible for any damage to your device.
[*] If you have any problem when using the Coolpad Mega 5C Flash File/Firmware/Rom, or can not find the device model what you want, Please contact us via Contact Us page, and we will make a response as soon as possible.
>> How To Flash Coolpad Mega 5C:
1. Download and install the SPD Driver on your PC (Pass this step if you have already done it).
2. Download provided Stock Firmware of your Spreadtrum/Unisoc Device(Pass this step if you have already done it).
3. Extract the SPD Upgrade Tool on your computer.
4. Open UpgradeDownload.exe to start the Tool.
5. Click on the Load Packet Button.
6. Locate the .pac based provided Firmware on your PC and Click on Open buttom to Load the Firmware.
7. Connect your Device to the Computer by using the matched USB Cable (make sure the device is Power Off).
8. Click on Start Downloading button to start the Flashing process on your device.
9. The flashing process may take few minutes.
10.The Passed Message will be showed on the Upgrade Too when done.
11.Close Upgrade Tool and Disconnect your device from the PC.