Skip to content

Xiaomi Mi11 Pro(Ultra) 13.0 Flash File Scatter Download | Firmware Rom Update 2024

Xiaomi Mi11 Pro(Ultra) 13.0 Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Xiaomi Mi 11 Ultra Firmware ROM is packaged in a zip file, including the Mi11 Ultra flash file, driver, flash tool, and a detailed flash tutorial.

Why We Download Xiaomi Mi 11 Ultra Firmware (Flash File/Rom):

  1. To revert the phone to its default settings.
  2. To update the device to the latest version.
  3. To rectify boot loop issues.
  4. To improve the overall software performance.
  5. To eliminate stutter issues.

Xiaomi Mi 11 Pro Ultra Flash File (Custom Rom) Information

Xiaomi flash file
Rom NameXiaomi Mi 11 Pro(Ultra) Flash File (Rom/Firmware)
ROM Size5.79G
Rom OS VersionAndroid 13.0
Model nameMi11 Pro(Ultra)
CompressZip Format

Xiaomi Mi 11 Pro(Ultra) Flash File/Firmware/ROM Latest Free Download Link 2023

Mi 11 Ultra 13.0 Flash File Download Link

Important Notes on Xiaomi Mi 11 Ultra Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.

  • All the data will be deleted during flashing. Kindly back up personal data, such as your address book, beforehand.
  • Ensure the model and ROM package are correct.
  • Try to confirm that the power of the mobile phone is above 30%, and ensure that the data cable is in good condition. For desktop computers, please use the USB port on the back of the host.
  • Avoid moving the phone, rebooting, or disconnecting the power in case of flashing failures. Please strictly adhere to tutorial and tool instructions.
  • Please verify if your phone has been unlocked prior to flashing.
  • Install the driver before flashing to prevent flashing failure. (Reboot the computer after driver installation.) Once everything is set, please proceed with the steps below.

>> How To Flash Mi 11 Pro(Ultra) 13.0 Firmware Rom:

Step 1: The phone must first be unlocked Bootloader.

(If previously unlocked, proceed to step two directly.)

Step 2: Access the Driver folder and install the provided drivers by double-clicking.

Step 3: Open the XiaoMiFlash folder in the MiFlash2018-5-28-0 folder.

Step 4: Install the driver tool

(1) Click Driver
(2) Click to install

Step 5: Configure files

(1) Click to select
(2) Locate the ROM folder path: XS_Xiaomi_Mi11_pro(Ultra)_13
(3) Click to confirm
(4) Select delete all of the flashing mode in the bottom right corner

Step 6: Power off the phone, then press and hold the volume down and power buttons to enter fastboot mode. Connect it to the computer using a USB cable.

(1) Click to load the device
(2) Click to flash phones

Step 7: If flashing successfully, it will automatically boot up (Long-press power button to boot up is ok). The page of successful flashing can be shown in the figure below.

PS: Kindly exercise patience during the process.

Topics Covered:

Similar flash files:

Latest flash files:

HOT: