Skip to content

OPPO A17k CPH2471 Flash File Scatter Download | Firmware Rom Latest Version 2024

Welcome! You’re on the page to download OPPO A17k CPH2471 Flash File (Stock Rom, Firmware). Check out the download link below and let’s get started!

The OPPO CPH2471 Scatter file is bundled in a zip package, encompassing the OPPO A17k Firmware, Flash Tool, and a comprehensive Flash Tutorial.

Advantages of OPPO A17k Firmware:

  1. Restoring your OPPO A17k device to its default factory configuration.
  2. Bringing your device up to date with the latest Android version.
  3. Resolving boot loop concerns on your OPPO device.
  4. Enhancing the overall performance of your device’s software.
  5. Correcting stutter issues on your device.

OPPO A17k Flash File (Custom Rom) Information

Rom NameOPPO A17k Flash File (Rom/Firmware)
ROM Size3.85G
Rom OS VersionAndroid 12.0
Model nameOPPO A17k
CompressZip Format

OPPO A17k Flash File/Firmware/ROM Latest Free Download Link 2024

OPPO A17k CPH2471 Flash File Download Link

Important Notes on OPPO A17k (CPH2471) Flash:

Disclaimer: Prior to flashing, kindly disable computer security managers or anti-virus software to prevent accidental file deletion. Wire-flashing is intended solely for firmware upgrades, downgrades, and software repairs. For any hardware issues, please opt for after-sales maintenance service.

（1）All the data will be deleted during flashing. Please back up your personal data, such as address book, and short messages, before flashing in advance.
（2）Confirm the correctness of the model and ROM package before proceeding.
（3）Verify that the mobile phone has a power level above 30%, and ensure the data cable is in good condition. For desktop computers, use the USB port on the back of the host.
（4）Do not move mobile phones, reboot, or disconnect the power in case of flashing failures in the process. Please strictly follow the instructions of the tutorial and tool.
（5）For certain phones like Xiaomi Bootloader, flashing should be done under the unlocked status. Confirm whether your phone has been unlocked before initiating the flash.
（6）The driver must be installed before flashing; otherwise, flashing failures may occur. Ensure the computer is rebooted after the driver installation.

Once all prerequisites are in place, kindly proceed with the following steps.

>> How To Flash OPPO A17k Firmware Rom:

Step 1: The phone must first be unlocked the Bootloader. (If you have unlocked it before, you can skip directly to the second step. If not, please unlock it first)

Step 2: Open the Driver folder and double-click to install the following drivers.

Step 3: Open the flash tool and configure the flash files

  1. Open the flash_tools folder to open the OPPO A17k Flash File SP flash tool.exe.

2. Configure the flash files

Marked point 1: Select the MTK_AllInOne_DA.bin file, which is in the Flash tools folder
Marked point 2: Select the MT6750_Android_scatter.txt file, which is in the images folder
Marked point 3: Select Download only for flashing mode
Marked point 4: Remove the check from the preloader partition column

Step 4: Start flashing. When the phone is turned off, please short circuit the phone to jump authorization. The short circuit point is shown in the figure below.

Use the USB data cable to connect to the computer. When the mobile phone is recognized, the jump verification will be automatically performed. The tool interface is as follows for a successful jump.

After the jump is successful, click the Download button in the SP flash tool to start flashing. The interface is as follows:

Wait for the flashing to complete and the Download OK dialog box will pop up, indicating that the flashing is successful. Then the phone can be rebooted.

If you have any issues with the OPPO A17k Firmware Scatter File, please reach out to us through the Contact Us page. We will promptly respond to your inquiry.

Topics Covered:

Similar flash files:

Latest flash files:

HOT: