Skip to content

OPPO R11t Flash File Scatter Download | Firmware Rom Update 2024

The OPPO R11t Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The OPPO R11t Firmware ROM is packaged in a zip file, including the flash file, driver, flash tool, and a detailed flash tutorial.

Why We Download OPPO R11t Firmware (Flash File/Rom):

  1. To restore the Oppo device to its original configuration.
  2. To upgrade the device to the most recent Android version.
  3. To address boot loop problems.
  4. To enhance software performance.
  5. To resolve stutter issues.

OPPO R11t Flash File (Custom Rom) Information

oppo flash file
Rom NameOPPO R11t Flash File (Rom/Firmware)
ROM Size8.34G
Rom OS VersionAndroid 7.1.1
Model nameOPPO R11t
CompressZip Format

OPPO R11t Flash File/Firmware/ROM Latest Free Download Link 2024

Important Notes on OPPO R11t Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Also, please note that flashing is intended for firmware upgrades, downgrades, and software repairs, not for hardware issues.

  • Flashing will result in the loss of all data. Therefore, it is crucial to backup personal data in advance, such as contacts and messages.
  • Double-check that the model of your device matches the ROM package.
  • Aim for at least 30% battery and a sturdy data cable. If you’re on a desktop, please use the USB port on the back of the host.
  • To avoid flashing failure, keep your phone steady and don’t restart the computer, or disconnect power sources.
  • The driver must be installed before flashing. Otherwise, flashing failure may occur. (The computer should be rebooted after the driver has been installed.)

>> How To Flash OPPO R11t Firmware Rom:

Step 1: first things first, make sure your phone’s bootloader is unlocked. If it’s already done, you can skip ahead to Step 2.

Step 2: Now, open that Driver folder and double-click to install the driver, as shown below. If you’ve already got it installed, skip to Step 3.

Step 3: Flashing

  1. Check if your phone’s system version is 7.1.1

(1) If it is, power the phone off, then hold down the volume down and power buttons to enter fastboot mode. Then, just double-click “flash.bat” in the “image” directory to start flashing.

(2) If it’s not, hold down the volume up and down buttons to get into 9008 mode, and flash the package in the “rom” directory. Once that’s done, boot into fastboot mode and hit up “flash.bat” in the “image” directory to flash the ROM.

2. Enter fastboot mode: Power on the phone, go to Settings > About Phone, tap the build number repeatedly to enable Developer Mode, then access ADB commands and enter the command adb reboot bootloader.

You will see the flashing screen below:

Once the flashing is successful, the interface will close automatically, and the phone will restart by itself.

Topics Covered:

Similar flash files:

Latest flash files: