Skip to content

Xiaomi Mi11 Pro(Ultra) 11.0 Flash File Scatter Download | Firmware Rom Update 2024

Xiaomi Mi11 Pro(Ultra) 11.0 Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Xiaomi Mi 11 Pro(Ultra) Firmware ROM is packaged in a zip file, including the Mi 11 Pro flash file, driver, flash tool, and a detailed flash tutorial.

Why We Download Xiaomi Mi 11 Pro(Ultra) Firmware (Flash File/Rom):

  1. To revert the phone to its default settings.
  2. To update the device to the latest version.
  3. To rectify boot loop issues.
  4. To improve the overall software performance.
  5. To eliminate stutter issues.

Xiaomi Mi 11 Ultra Flash File (Custom Rom) Information

Xiaomi flash file
Rom NameXiaomi Mi 11 Pro(Ultra) Flash File (Rom/Firmware)
ROM Size5.57G
Rom OS VersionAndroid 11.0
Model nameMi 11 Pro(Ultra)
CompressZip Format

Mi 11 Pro(Ultra) 11.0 Flash File Download Link

Important Notes on Xiaomi Mi 11 Pro(Ultra) Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.

  • All the data will be deleted during flashing. Please back up your personal data, like your address book, before flashing.
  • Please confirm whether the model and ROM package are correct or not.
  • Try to confirm that the power of the mobile phone is above 30%, and ensure that the data cable is in good condition. For desktop computers, please use the USB port on the back of the host.
  • Do not move mobile phones, reboot, or disconnect the power in case of flashing failures. Please strictly follow the instructions of the tutorial and tool.
  • Some phones, such as Xiaomi Bootloader, must be flashed under the unlocked status. So please confirm whether your phone has been unlocked before flashing.
  • The driver must be installed before flashing, otherwise it may occur flashing failure. (The computer should be rebooted after the driver has been installed.) (When all have fallen into place, please follow the steps below.)

>> How To Flash Mi 11 Pro(Ultra) 11.0 Firmware Rom:

Step 1: The phone must first be unlocked Bootloader.

(If you have unlocked it before, you can skip directly to the second step.)

Step 2: Open the Driver folder and double-click to install the following drivers.

Step 3: Open the XiaoMiFlash folder in the MiFlash2018-5-28-0 folder.

Step 4: Install the driver tool

(1) Click Driver
(2) Click to install

Step 5: Configure files

(1) Click to select
(2) Click the ROM folder directory: XS_Xiaomi_Mi11_pro(Ultra)_11
(3) Click to confirm
(4) Select delete all of the flashing mode in the bottom right corner

Step 6: Turn off the phone, and press and hold the volume down and power button to enter the fastboot mode. Then connect it to the computer with a USB cable.

(1) Click to load the device
(2) Click to flash phones

Step 7: If flashing successfully, it will automatically boot up (Long-press power button to boot up is ok). The page of successful flashing can be shown in the figure below.

PS: Please wait patiently for the first relatively long start-up.

Topics Covered:

Similar flash files:

Latest flash files: