Skip to content

Vivo Y5s Flash File Scatter Download | Firmware Rom Update 2024

Vivo Y5s Flash File (Stock Rom, Firmware) is provided here for free download. You can access it through the link below.

The Vivo Y5s Firmware ROM is packaged in a zip file, including the Y5s flash file, driver, flash tool, and a detailed flash tutorial.

Why We Download Vivo Y5s Firmware (Flash File/Rom):

  1. To revert your phone to its default settings.
  2. To update the device to the latest version.
  3. To rectify boot loop issues.
  4. To improve the overall software performance.
  5. To eliminate stutter issues.

Vivo Y5s Flash File (Custom Rom) Details

vivo
Rom NameVivo Y5s Flash File (Rom/Firmware)
ROM Size4.75G
Rom OS VersionAndroid 9.0
Model nameVivo Y5s
CompressZip Format

Vivo Y5s Flash File/Firmware/ROM Latest Free Download Link 2023

Vivo Y5s Flash File Download Link

Important Notes on Vivo Y5s Flashing:

Disclaimer: Please close the computer security manager or anti-virus software before flashing in case of deleting files by mistake. Wire-flash is just used for firmware upgrades, downgrades, and software repair. If there are any hardware issues, please select the after-sales maintenance service.

  • Before flashing, be sure to back up all personal data such as contacts and messages.
  • Verify the correct model and ROM package before proceeding.
  • Ensure the phone’s battery level is above 30% and use a reliable data cable. For desktops, use the USB port at the back of the computer.
  • During flashing, avoid moving the phone, rebooting, or disconnecting the power to prevent failures. Follow the provided tutorial and tool instructions carefully.
  • Install the required drivers before flashing to avoid potential failures. Reboot the computer after driver installation. Once everything is set, proceed with the following steps.

>> How To Flash Vivo Y5s Firmware on Your Device:

Step 1: The phone must first be unlocked Bootloader.
(if you have unlocked it before, you can jump directly to the second step. If not, please unlock it first)

Step 2: Open the Driver folder and double-click to install the following drivers

Step 3: Open the XiaoMiFlash folder in the MiFlash2018-5-28-0 folder.

Step 4: Install the driver tool
（1）Click Driver
（2）Click to install

Step 5: Configure files
（1）Click to select
（2）Click the ROM folder directory: XS_vivo_Y5s_9
（3）Click to confirm
（4）Select delete all of the flashing mode in the bottom right corner

Step 6: Turn off the phone, and press and hold the volume up and power button to enter the fastboot mode. Then connect it to the computer with a USB cable.
（1）Click to load the device
（2）Click to flash phones

Step 7: If flashing successfully, the phone will automatically boot up. (You can manually boot up by pressing the power button.). The page of successful flashing can be shown in the figure below.

PS: Please wait patiently for the relatively long start-up. (Please solve it based on the following solutions if flashing unsuccessfully.)

Topics Covered:

Similar flash files:

Latest flash files:

HOT: